SHMIX

SHMIX is a 6 channel DC mono mixer with separate input attenuator knobs for each channel. The mix output has a separate master level knob. The mix can also be levelshifted by the shift knob and sent to a separate shift output.

All knobs are linear.

On the backside there are pin strips for all inputs and outputs. These pins are connected when no cables are attached to the jacks. If you insert a cable in a jack, then the connection to the pin on the backside is broken. This can be used to have the normal functions connected on the backside and hide some cables in the front. You can also chain multiple SHMIXes together with the pins on the backside.

Technical details
Width: 6HP
Depth: 21 mm
+12V: 7,5 mA
-12V: 7,5 mA

[To product list]

manikk SHMIX Usage
manikk SHMIX Functions
manikk SHMIX Installation
Pin header on the back side

The pin header on the backside and the pins (to the left) for all functions. Each pin has a dedicated GND-pin (to the right in the picture).

  • Shifted out
  • Mix out
  • Channel 6 input
  • Channel 5 input
  • Channel 4 input
  • Channel 3 input
  • Channel 2 input
  • Channel 1 input
  • Cap input – has a DC blocking capacitor at the input
  • Line input – no capacitor, just an additional line in for cascading