Product status: Active

manikk LFO2 is a dual LFO with triangle and square waveforms.
Each LFO has individual rate, symmetry, shift and output level controls.
The shift and levels are individual per output jack.

Features for each LFO:

  • Rate knob
  • Rate indicator LED
  • Symmetry knob
  • Triangle bias shift
  • Triangle output level
  • Triangle output jack
  • Square bias shift
  • Square output level
  • Square output jack

The rate can be configured in steps by solder-jumpers on the backside, from about 1Hz to 850Hz maximum frequency. By default the upper LFO’s is configured for faster speed, and the lower is slower.

With the symmetry knob, you can adjust the width of the waveform from about 2% to 98%. (The first few modules had reduced symmetry, read more in tricks and hacks below).

The output levels are bipolar and about +-5.5V (Vpp approx 11V).

All outputs have a 1K resistor before the signal is sent to the output-jack.

See also the FAQ for more tricks and hacks for this module.

Package Contents

  • 1 Module
  • 2 Screws
  • 1 Power cable
  • Cardboard box


1,490 SEK

Technical specifications


Width: 6 HP
Depth: 21 mm

Current consumption

+12V: 23mA
-12V: 23mA

Additional files, images and videos

Left view

Right view

Back view